So I bought a CECHB-01 not long ago as I have always loved them with the sleek all black look. Well Since I tinker with my dev_flash alot and NAND's aren't as easy to recover from a semi-brick like slims I had @Citrus3000psi perma install a teensy++ for me. He did it keeping the entire thing hidden with a passive connection. I only have to plug into USB007 and an external 3.3v PSU to activate the NAND flasher for recovery. Here is pics of his work and I thought I would share. He does AMAZING work and you will be hard pressed to beat his quality and best of all prices.
Work done
Teensy++ Passive "Stealth" install with no need to remove case to access/use NAND flasher
19 Blade fan
ZSSR 5391A PSU swapped out for the much cooler and lower power consumption APS-226
Seagate (ST1000LM014) 1TB Gaming SSHD SATA 8GB NAND SATA 6Gb/s 2.5-Inch swapped for the original 5400RPM 20gb HDD
Here are temps after 6 hour gaming session running webMAN MOD fan speed @ 33%
Clipboard017.jpg
Teensy++ install work
Clipboard01.jpg
FB_IMG_1460130035603.jpg
FB_IMG_1460130048580.jpg
FB_IMG_1460130078562.jpg
Teensy++ is "activated" by simply using this setup. Once USB is plugged into port furthest away from the BD drive I take the Y-USB cable and plug one into the PC and one into the external PSU for power. Keeping it 100% stealth and no need to remove cover if needed.
Clipboard0188.jpg
And what the "Black Beauty" looks like as it is virtually 100% MINT and was acquired at a lower then 3.41 firmware. Thermal paste was still wet and not dried up upon first opening the system.
Clipboard03.jpg
I am super happy with the work and the way it operates keeping it out of my child's hands as they get curious. Luckily I also have PSNPatch and PS3Lock plugins. Hope you guys enjoy the pics.
Work done
Teensy++ Passive "Stealth" install with no need to remove case to access/use NAND flasher
19 Blade fan
ZSSR 5391A PSU swapped out for the much cooler and lower power consumption APS-226
Seagate (ST1000LM014) 1TB Gaming SSHD SATA 8GB NAND SATA 6Gb/s 2.5-Inch swapped for the original 5400RPM 20gb HDD
Here are temps after 6 hour gaming session running webMAN MOD fan speed @ 33%
Clipboard017.jpg
Teensy++ install work
Clipboard01.jpg
FB_IMG_1460130035603.jpg
FB_IMG_1460130048580.jpg
FB_IMG_1460130078562.jpg
Teensy++ is "activated" by simply using this setup. Once USB is plugged into port furthest away from the BD drive I take the Y-USB cable and plug one into the PC and one into the external PSU for power. Keeping it 100% stealth and no need to remove cover if needed.
Clipboard0188.jpg
And what the "Black Beauty" looks like as it is virtually 100% MINT and was acquired at a lower then 3.41 firmware. Thermal paste was still wet and not dried up upon first opening the system.
Clipboard03.jpg
I am super happy with the work and the way it operates keeping it out of my child's hands as they get curious. Luckily I also have PSNPatch and PS3Lock plugins. Hope you guys enjoy the pics.